Lipped C-studs (S)

350S200-54

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 3.5t = 0.0566t = 0.0566
Cross-section, to scaledimensions in inches

Dimensions

Depthd
3.5in
Flange widthbf
2in
Thicknesst
0.0566in
Liplip
0.625in
Inside bend radiusri
0.08488in

Mass and area

Mass per lengthm
1.604lb/ft
Cross-sectional areaA
0.4714in²
Outside perimeterP
16.77in

Strong axis x–x

Moment of inertiaIx
0.9505in⁴
Elastic section modulusSx
0.5431in³
Plastic section modulusZx
0.6236in³
Radius of gyrationrx
1.42in

Weak axis y–y

Moment of inertiaIy
0.274in⁴
Elastic section modulusSy
0.217in³
Plastic section modulusZy
0.3152in³
Radius of gyrationry
0.7623in

Torsion and stability

Torsional constantJ
0.0005034in⁴

Centers

Centroidx̄
0.7375in

Equivalents in other standards