Lipped C-studs (S)

350S200-97

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 3.5t = 0.1017t = 0.1017
Cross-section, to scaledimensions in inches

Dimensions

Depthd
3.5in
Flange widthbf
2in
Thicknesst
0.1017in
Liplip
0.625in
Inside bend radiusri
0.1525in

Mass and area

Mass per lengthm
2.767lb/ft
Cross-sectional areaA
0.813in²
Outside perimeterP
16.19in

Strong axis x–x

Moment of inertiaIx
1.578in⁴
Elastic section modulusSx
0.902in³
Plastic section modulusZx
1.053in³
Radius of gyrationrx
1.393in

Weak axis y–y

Moment of inertiaIy
0.4413in⁴
Elastic section modulusSy
0.3483in³
Plastic section modulusZy
0.5232in³
Radius of gyrationry
0.7368in

Torsion and stability

Torsional constantJ
0.002803in⁴

Centers

Centroidx̄
0.7329in

Equivalents in other standards