Lipped C-studs (S)

400S200-33

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 4t = 0.0346t = 0.0346
Cross-section, to scaledimensions in inches

Dimensions

Depthd
4in
Flange widthbf
2in
Thicknesst
0.0346in
Liplip
0.625in
Inside bend radiusri
0.07642in

Mass and area

Mass per lengthm
1.054lb/ft
Cross-sectional areaA
0.3097in²
Outside perimeterP
17.97in

Strong axis x–x

Moment of inertiaIx
0.8121in⁴
Elastic section modulusSx
0.4061in³
Plastic section modulusZx
0.4652in³
Radius of gyrationrx
1.619in

Weak axis y–y

Moment of inertiaIy
0.1832in⁴
Elastic section modulusSy
0.1407in³
Plastic section modulusZy
0.2047in³
Radius of gyrationry
0.769in

Torsion and stability

Torsional constantJ
0.0001236in⁴

Centers

Centroidx̄
0.6981in

Equivalents in other standards