Lipped C-studs (S)

600S200-43

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 6t = 0.0451t = 0.0451
Cross-section, to scaledimensions in inches

Dimensions

Depthd
6in
Flange widthbf
2in
Thicknesst
0.0451in
Liplip
0.625in
Inside bend radiusri
0.07118in

Mass and area

Mass per lengthm
1.674lb/ft
Cross-sectional areaA
0.492in²
Outside perimeterP
21.91in

Strong axis x–x

Moment of inertiaIx
2.683in⁴
Elastic section modulusSx
0.8943in³
Plastic section modulusZx
1.049in³
Radius of gyrationrx
2.335in

Weak axis y–y

Moment of inertiaIy
0.2685in⁴
Elastic section modulusSy
0.1883in³
Plastic section modulusZy
0.2723in³
Radius of gyrationry
0.7388in

Torsion and stability

Torsional constantJ
0.0003336in⁴

Centers

Centroidx̄
0.5744in

Equivalents in other standards