Tracks (T)

250T200-97

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 2.703t = 0.1017t = 0.1017
Cross-section, to scaledimensions in inches

Dimensions

Depthd
2.703in
Flange widthbf
2in
Thicknesst
0.1017in
Inside bend radiusri
0.1525in

Mass and area

Mass per lengthm
2.189lb/ft
Cross-sectional areaA
0.6433in²
Outside perimeterP
12.85in

Strong axis x–x

Moment of inertiaIx
0.7894in⁴
Elastic section modulusSx
0.584in³
Plastic section modulusZx
0.6643in³
Radius of gyrationrx
1.108in

Weak axis y–y

Moment of inertiaIy
0.2697in⁴
Elastic section modulusSy
0.2001in³
Plastic section modulusZy
0.3584in³
Radius of gyrationry
0.6475in

Torsion and stability

Torsional constantJ
0.002182in⁴

Centers

Centroidx̄
0.6521in

Equivalents in other standards