Lipped C-studs (S)

250S200-54

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 2.5t = 0.0566t = 0.0566
Cross-section, to scaledimensions in inches

Dimensions

Depthd
2.5in
Flange widthbf
2in
Thicknesst
0.0566in
Liplip
0.625in
Inside bend radiusri
0.08488in

Mass and area

Mass per lengthm
1.412lb/ft
Cross-sectional areaA
0.4148in²
Outside perimeterP
14.77in

Strong axis x–x

Moment of inertiaIx
0.44in⁴
Elastic section modulusSx
0.352in³
Plastic section modulusZx
0.402in³
Radius of gyrationrx
1.03in

Weak axis y–y

Moment of inertiaIy
0.2416in⁴
Elastic section modulusSy
0.2072in³
Plastic section modulusZy
0.285in³
Radius of gyrationry
0.7631in

Torsion and stability

Torsional constantJ
0.000443in⁴

Centers

Centroidx̄
0.8343in

Equivalents in other standards