Lipped C-studs (S)

250S200-68

Standard: AISI S200 / SFIASource: Calculated (exact engine)
Geometry derived from the standard designation (SFIA / AISI S200): depth, flange, lip, design thickness and inside radius. Gross (not effective) properties.
xybf = 2d = 2.5t = 0.0713t = 0.0713
Cross-section, to scaledimensions in inches

Dimensions

Depthd
2.5in
Flange widthbf
2in
Thicknesst
0.0713in
Liplip
0.625in
Inside bend radiusri
0.1069in

Mass and area

Mass per lengthm
1.752lb/ft
Cross-sectional areaA
0.5148in²
Outside perimeterP
14.58in

Strong axis x–x

Moment of inertiaIx
0.5379in⁴
Elastic section modulusSx
0.4303in³
Plastic section modulusZx
0.4949in³
Radius of gyrationrx
1.022in

Weak axis y–y

Moment of inertiaIy
0.2934in⁴
Elastic section modulusSy
0.2515in³
Plastic section modulusZy
0.3496in³
Radius of gyrationry
0.755in

Torsion and stability

Torsional constantJ
0.0008723in⁴

Centers

Centroidx̄
0.833in

Equivalents in other standards